Fuel, Coolant and Injector Hose

We have a wide range of hoses, sold by the metre. Fuel hose and coolant hose....

We also have coolant hose kits listed here, making it more convenient to connect up your heat exchangers and heated filters.

Fuel Hose

  • Meets SAEJ30 R6 specifications
  • Rated -20°C to +120°C
  • Working pressure 116 psi (8bar)
  • Suitable for vegetable oil, diesel and unleaded petrol

8mm Internal diameter fuel hose - £3.00 per metre (update the qty in the shopping basket for the length of hose required)

10mm Internal diameter fuel hose - £3.25 per metre (update the qty in the shopping basket for the length of hose required)

Coolant Hose

  • Meets SAEJ20 R3 specifications
  • Rated -40°C to +120°C
  • Working pressure 145 psi (10bar)

12mm Internal diameter coolant hose - £3.00 per metre (update the qty in the shopping basket for the length of hose required)

16mm Internal diameter coolant hose - £3.25 per metre (update the qty in the shopping basket for the length of hose required)

CHK01

Coolant hose kit - 12mm version

This is the coolant hose kit for the HE3 heat exchanger when installed without a heated filter. The fittings allow for either 19mm or 16mm coolant lines to be tee'd and reduced down to 13mm for coolant run to the heat exchanger.

  • The kit comprises;
  • 3m of 12mm coolant hose
  • 2 x 19mm coolant branch tees
  • 2 x 16mm coolant branch tees
  • 2 x 12mm swivel nut hose tails
  • 8x hose clips

£18.50

CHK02
Coolant hose kit - 16mm version

For teeing off coolant lines from the cabin heater hoses to heated filters. The fittings allow for either 19mm or 16mm coolant lines to be tee'd and reduced (if required) to 16mm for coolant run to the heated filter.

  • The kit comprises;
  • 3m of 16mm coolant hose
  • 2 x 19-16mm reducing tees
  • 2 x 16mm equal tees
  • 8x hose clips

£15.75

CHK03
Coolant hose kit - 16/12mm version

For teeing off coolant lines from the cabin heater hoses to a heated filter and a heat exchanger. The fittings allow for either 19mm or 16mm coolant lines to be tee'd and reduced (if required) to 16mm for coolant run to the heated filter and then further reduced to 12mm for the HE3 heat exchanger.

  • The kit comprises;
  • 2m of 16mm coolant hose
  • 2m of 12mm coolant hose
  • 2 x 19-16mm reducing tees
  • 2 x 16mm equal tees
  • 2 x 16-12mm reducers
  • 14x hose clips  

£20.50